特殊阀门

AEA Safety valve is a valve that act as a protection of equipment from exploding or damaging and it is mainly installed in pressure vessels such as chemical plants, electric power boilers and gas storage tanks.
Safety Valve is a type of valve that automatically actuates when the pressure of inlet side of the valve increases to a predetermined pressure, to open the valve disc and discharge the fluid (steam or gas ) ; and when the pressure decreases to the prescribed value, to close the valve disc again. Safety valve is so-called a final safety device which controls the pressure and discharges certain amount of fluid by itself without any electric power support.
Safety valve support not only the safety of energy industry but also the safety and security of our life.

There are three kinds of Safety Valves in FUKUI production line.

Generally, the safety valveｓ are referred to the Spring-loaded Pressure-relief valves, the most common type ( See the left figure ).
The load of the spring is designed to press the "Disc" against the inlet pressure.
Depending on the fluid type, such as steam, gas or liquid, we are offering a Bellows model to clear the back pressure effect.

Pilot-operated Pressure-relief Valves are composed of Pilot Assy and Main Valve. Although Spring-loaded Pressure-relief valves adopts the force of the spring against the inlet pressure, the reliving pressure and reseating pressure of the Pilot-operated Pressure-relief Valves is controlled by Pilot Assy, which acts nearly as same as Spring-loaded Pressure-relief valves. There is no adjusting function in the Main Valve.
Pilot-operated Pressure-relief Valves have larger size variations compared to Spring-loaded type, which is applied in a severe condition such as high pressure.